Print Design onto Silk
Now this is where it all starts to come together. Remember, practice makes perfect, but in this case practice before print makes perfect! Make sure the printer is set to banner mode (this feature is normally found in the ‘Properties’ menu of the printer) Also, select ‘high’ quality print mode so as to get the most ink on the silk; check that the waxed paper & silk combination are fed into the printer at the correct angle and the correct way up; then check everything again! Eventually, after 100% checks click ‘print’.


For your silk tie call: 01582 469 973
Calling outside the UK? Then dial 0044 1582 469 973